Power Inverter MPI-6000W-12-110
Converts DC battery power into 200 watts of AC household power (110-120volt)
Its well engineered design makes PI6000 highly reliable and compact for an inverter at this power level. It attaches safely and easily to deep-cycle batteries. Plug-and-play AC receptacles with dedicated breakers are standard on this model. In addition, PI6000 can be installed with a hardwire AC output and a remote control on/off switch. PI6000 has an easy-to-read display for monitoring battery current and voltage.
6000-watt maximum continuous power
12000-watt surge capacity
Bar graph display for monitoring battery status
LED power indicators for over temperature and overload
Two grounded AC receptacles with dedicated 15-amp breakers
Light and durable aluminium housing
Regulated output to protect equipment from voltage spikes and fluctuations
Quiet operation
Protection Features
Over temperature shutdown
Short circuit output protection
Reverse polarity protection
Over voltage protection
Under voltage protection
Low voltage alarm
Max. Continuous Power |
|
6000 watts |
Surge Capability(Peak Power) |
|
12000 watts |
AC output voltage |
|
110 - 120 VAC |
AC output frequency |
|
60 +/- 4 Hz |
AC output waveform |
|
Modified Sine Wave |
DC input voltage range |
|
11-15volts DC |
Battery drain with no AC load |
|
<2.50 amps DC (at 12V input) |
Fuse |
|
30 amp(spade type) |
General Specifications |
||
Dimensions(L x W x H) |
|
31.3/4"x9.1/2"x6.3/16" 691x230x155mm |
Weight |
|
27.5 lb (12.50 kg) |